1 1/4 Ape Hanger PACKAGE Pre-Wired with Controls and Cables in Black or Chrome

You will not find a more complete ape hanger package. This item includes everything you need to put apes on your bike, except for the labor. We use these same parts to put apes on bikes in our shop, so we definitely know what you need to pull it off. This kit is for any Harley Bagger, Dyna, Softail, or Sportster model 1990-2010, (except faring models and models with electronic cruise or radio controls). You will be getting a set of 1 1/4 inch FAT 18 inch ape hangers with chrome handlebar controls, chrome or black handlebar switches already wired internally, all of the stainless cables in the correct lengths for your specific application. The handle bars do reduce in size to 1 inch at the riser clamp so you may use your stock risers if you want to.

• 10 inch ( 1 1/4 inch diameter, 35 inch width, 8 inch pullback )
• 12 inch ( 1 1/4 inch diameter, 35 inch width, 8.5 inch pullback )
• 14 inch ( 1 1/4 inch diameter, 35 inch width, 8.5 inch pullback )
• 16 inch ( 1 1/4 inch diameter, 36 inch width, 8.5 inch pullback )
• 18 inch ( 1 1/4 inch diameter, 37 inch width, 9.5 inch pullback )
• 20 inch ( 1 1/4 inch diameter, 37.5 inch width, 9.5 inch pullback )

Handlebar control set includes chrome master cylinder for single or dual disc applications (your choice), chrome switch housings for all models, chrome clutch bracket, chrome handlebar clamps, chrome levers, and chrome mounting hardware.

The switches available come with chrome or black switch caps ( your choice ) already internally installed in whatever bar set you choose. All of the wires are color coded to match your existing wiring harness. Wiring connectors and instructions are included as well. Wiring will look OEM when completed.

Black Vinyl or Stainless Steel Braided cables come in the correct length for your specific application. They have chrome plated ends and plastic armor coat over the stainless braid to keep from scratching your paint, and to keep the stainless looking good for a long time.

Make your Handlebar Kit a true plug and play install by adding the pins & connectors option.

By selecting this option, we will cut your handlebar harness wires to the length required for your model, crimp on the necessary OEM pins, and install the wires in an OEM connector with the correct pin locations. No hassle trying to cut and solder wires, or blowing fuses because you got the wires backwards. Saves 2-3 hours on your installation time.

• Add $30 for 18 inch or 20 inch apes.
• Dual front disc models will have to add $65 for the extra brake lines needed.
• 2007 and later models have a clutch safety switch on the left side hand controls and require a different clutch lever and the installation of a clutch safety switch in the wiring harness. We charge $40 extra to add this.
• Some Sportster models have a wider than normal riser width. In some cases you might have to grind the outside portion of the risers for clearance. The width of the 1 inch riser section between the 1 1/4 inch tubing on our bars is 5 1/4 inch.

No more hassle trying to round up the right length cables, we already know what you need. We have put a lot of time and research to compile the database needed to get you the correct parts. You will not find a more complete ape hanger package on the internet. Just let us know the year and model of your bike and riser height when you make payment, ( you can call us with the info if you like 512-264-7333 ) and we will handle the rest. If you want to know more, call us at the shop 512-264-7333.

We carry a full line of handlebars and stainless braided cables. If you don't see what you need on this website, call or e-mail us and we can put a custom package together for you.

NOTICE: Here at HCC, we build each handlebar kit based on your needs and specifications. This process starts once your handlebar kit is ordered and paid. Please allow 7-14 business days for your parts to arrive.