You are buying a complete package that includes 1 1/4 inch FAT 10 inch, 12 inch, 14 inch, 16 inch, 18 inch or 20 inch powder coated Gloss or Flat Black ape hangers with Stainless Steel braided or black throttle cables, clutch cable, and front brake line to fit any Harley model 1987-2009 (except Touring models with a fairing, models with electronic cruise or radio controls and some Sportster models see note.) The handle bars do reduce in size to 1 inch at the riser clamp to accept stock risers. They also reduce down to 1 inch at the grip ends to accept stock controls. Our bars are pre-drilled with holes larger than other manufacturers to make the job of running the wires through the bars is a much easier task. Below are the specs for each size:
- 10 inch ( 1 1/4 inch diameter, 35 inch width, 8 inch pullback )
- 12 inch ( 1 1/4 inch diameter, 35 inch width, 8.5 inch pullback )
- 14 inch ( 1 1/4 inch diameter, 35 inch width, 8.5 inch pullback )
- 16 inch ( 1 1/4 inch diameter, 36 inch width, 8.5 inch pullback )
- 18 inch ( 1 1/4 inch diameter, 37 inch width, 9.5 inch pullback )
- 20 inch ( 1 1/4 inch diameter, 37.5 inch width, 9.5 inch pullback )
No more hassle trying to round up the right length cables, we already know what you need. Just let us know the year and model of your bike and riser height when you check out, and we will handle the rest.
All of our cables are made from high quality braided stainless steel braid with a teflon inner coating for smooth operation, and have a clear protective outer coating for protection.
Note: Most 1 1/4 inch handlebars are 5 1/8 inch between the 1 1/4 inch sections where the risers mount. Some Sportster models have a wider than normal riser width that is about 5 1/2 inch. This is usually on later XL1200C and XL883C models where the speedometer is integrated into the risers. In some cases you might have to grind the outside portion of the risers for 1 1/4 inch handlebars to fit and clamp down properly.